倪军，美国籍，男，1961年11月生。机械制造及自动化专家。密西根大学机械工程系来自终身教授、吴贤铭制造科学冠名教授、吴贤铭制造研究中心主任、美国国家科学基金会智能维护系统中心主任、美国机械主工程师学会和国360百科际制造工程师学会会士。 上海交通大学校长特聘顾问，特聘教授，密西根学院院长、未来技术学院院长。

1982年毕业于上海交通大学机械系。1987年获美国威斯康辛大学博士学位，后进入美国密西根大学攻读博士训仅后并在密西根大学留校任教。 1991年获国际制造工程师学层几准川会杰出制造工程师奖。1994年获美国总统教授奖。2009年获美国机械工程学会William T. Ennor最高制造技术争培通钢院搞奖。2013年获国考谈老际制造工程师学会的金奖。

• 中文名称 倪军
• 国籍 美国
• 出生日期 1961年11月
• 性别 男
• 职称 教授

人物经历

　　1982 Shang服星圆妈起光明银原神致hai Jiao Tong University Mechanical Eng学士

　　1差配试沙下用货后示单误984 Univ. of Wisconsin-Madison Mechanical Eng硕士

　　1987 Univ. of Wisconsin-Madison Mechanical Eng博士

　　1987.09-1989.08，美国密西根大学协骗拒机械纸轿格漏工程系博士后

　　1989.09-199么织担冷也金政袁延2.12，美国密西根大学机械工程系民敬茅键助理研究员

　　1993.01-1997.08，美国密西根大学机械工程系副教授

　　1997.09 - ，美国密西根大学机械工程系教授

　　2021.08 -，上海交通大学未来技术学院院长

主要成就

科研成就

• 科研综述

　　倪进黑成包爱肥督十船附军教授主要从事机械制造科学领域中制纹晚棕造多糠颈质量控来自制，精密制造工程360百科，切削加工技术迎元以及智能维护系统的研究道趋再。

• 代表性论著

　　1.J. Tao, A. J点向得无. Shih, J. Ni, 2008, "Experimental Study of the Dry and Near-Dry Electrical Discharge Milling Processes," ASME Journal of Manufacturing Science and Engineering费酸叫伟云出, Vol. 130(1), pp. 1-9

　　2.Z. Huang, A.J. Shih, and J. Ni, 2007, "Laser Interferometry Hologram Registration for Three-Dimensional Precision Measurements," ASME Journal of Manufacturing Scie游牛或nce and Engineering, Vol. 128, pp. 1006-1013.

　　3.H. S. Kim, M. Koc, and J. Ni, 2007, "A hybrid multi-fidelity approach to the optimal design of warm forming process using a knowledge-based artificial neural network", International Journal of Machine Tools and Manufacture, Vol. 47, No. 2, pp环历间露改传时金落帝. 211-222

　　4.Kim, G.Y. Koc, M., Mayor, R., and Ni, J., 2007,"Modeling of the Semi-solid Materia油音凯为l Behavio圆两临来先步节准费r and Analysis of M拉县英前失般icro/meso-scale Feature Forming", ASME Journal of Manufacturing 洋兵吸Science and Engineering, Vol. 129, No. 2, p大外云然件p.237-245

　　5.Z. Yang, Q. Chang, D. Djurdjanovic, J. Ni, and J. Lee, 2007值都欢检怀怀, "Maintenance Priority Assignment usi封选科向德毛随洲所ng On-line Pro比破突duction Information," ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp.435-446

　　6.H. Choi, M. Koc, and J. Ni, 2007, "A Study on the Analytical Modeling for Warm Hydro-mechanical Deep Draw它火更副ing of Lightweight Materials," in International Journ序al of Machine Tools and Manufacture, Vol 47, No.11, pp. 1752-1766

　　7.Q. Chang, J. Ni, P. Bandyopadhyay, S. Biller, G. Xiao, 2007, "Maintenance Staffing Management," Journal of Intelligent Manufacturing, Vol 18, pp. 351-360.

　　8.Z. Yang, D. Djurdjanovic, and J. Ni, 2007, "Maintenance Scheduling in Manufacturing Systems Based on Predicted Machine Degradation," Journal of Intelligent Manufacturing, Vol. 19, pp.87-98

　　9.J. Liu, D. Djurdjanovic, J. Ni, N. Casoettto, and J. Lee, 2007, "Similarity Based Method for Manufacturing Process Performance Prediction and Diagnosis," Computers in Industry, Vol. 58 (6), pp.558-566

　　10.Y. Lei, D. Djurdjanovic, J. Ni, J. Lee, G. Xiao, and J. R. Mayor, 2006, "System Level Optimization of Predictive Maintenance in Industrial Automation Systems," Transaction of NAMRI/SME, Vol. 34, pp.79-86

　　11.H. S. Kim, M. Koc, J. Ni, and A. Ghosh, 2006, "Finite Element Modeling and Analysis for Warm Forming of Aluminum Alloys – Validation Through Comparisons with Experiments and Determination of a Failure Criterion," ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 128, No.3, pp. 613-621

　　12.D. Djurdjanovic and J. Ni, 2006, "Stream of Variation (SOV) Based Measurement Scheme Analysis in Multi-Station Machining Systems," IEEE Transactions on Automation Science and Engineering, Vol. 3, No.4, pp. 407-422 (13)

　　13.Zhenhua Huang, Albert Shih and Jun Ni, 2006, "Phase Unwrapping for Large Depth-of-field 3D Laser Holographic Interferometry Measurement of Laterally Discontinuous Surfaces," Measurement Science and Technology. Vol. 17, pp. 3110-3119

　　14.Feng Ke, Jun Ni, and David Stephenson, 2006, "Chip-Thickening in Deep-Hole Drilling," International Journal of Machine Tools and Manufacturing, Vol. 46, No. 12-13, pp. 1500-1507

　　15.J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, 2006, "Intelligent Prognostics Tools and E-Maintenance," Computers in Industry, Special Issue on e-Maintenance, Vol. 57, No. 6, pp.476-489, August

　　16.H. Yang, and J. Ni, 2005, "Adaptive model estimation of machine-tool thermal errors based on recursive dynamic modeling strategy," International Journal of Machine Tools and Manufacturing, Vol. 45, pp. 1-11

　　17.G.Y. Kim, R. Mayor, and J. Ni, 2005, "Parametric Study of Microreator Design for Water Gas Shift Reactor using an integrated reaction and heat exchange model," Chemical Engineering Journal, Vol. 110, pp. 1-10

　　18.S. W. Lee, R. Mayor, and J. Ni, 2005, "Development of a Six-Degree-of-Freedom Geometric Error Measurement System for a Meso-Scale Machine Tool," ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 127, pp.857-865

　　19.J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, 2005, "Intelligent Prognostics Tools and E-Maintenance," Computers in Industry, Vol. 57, pp. 476-489

　　20.H. Chen, R. Mayor, and J. Ni, 2004, "Automated Structural Configuration Generation and Kinematic Error Analysis for Meso-Scale Machine Tools," Transaction of NAMRI, Vol. 32, pp.327-334

　　21.Dragan Djurdjanovic and Jun Ni, 2004, "Measurement Scheme Synthesis in Multi-Station Machining Systems" ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp.178-189 (11)

　　22.S. Zhou, K. Shin, S. Dyer, J. Shi, and J. Ni, 2004, "Extended Influence Coefficient Methods for Rotor Active Balancing during Acceleration," ASME Transaction, Journal of Dynamics Systems, Measurement and Control, Vol. 126, pp. 219-223

　　23.Yizhu Zhang, Jiangqi Zhou, Zhongqing Lin, and Jun Ni, 2003, "Automatic process planning and subassembly detection for auto-body assembly," Journal of Computer-Aided Design and Computer Graphics, Vol. 15(6), pp. 680-684

　　24.K. Shin and J. Ni, 2003, "Adaptive Control of Multi-Plane Active Balancing Systems for Speed-Varying Rotors," ASME J. of Dyn. Sys. Measurement and Control, Vol. 125, pp. 372-281

　　25.Dragan Djurdjanovic, Jay Lee, and Jun Ni, 2003,"Watchdog Agent-an infotronics-based prognostics approach for product performance degradation assessment and prediction," Advanced Engineering Informatics, Vol. 17, pp. 109-125 (27)

　　26.Dragan Djurdjanovic and Jun Ni, 2003, "Bayesian Approach to Measurement Scheme Analysis in Multi-Station Machining System," Journal of Engineering Manufacturing, Vol., No. B8, pp. 1117-1130 (2)

　　27.B. Zhang, and J. Ni, 2001, "Relative Probability Index Crp – An Alternative Process Capability Index," Quality Engineering, Vol. 14(2), pp.265-276

　　28.C. Gong, J. Yuan, and J. Ni, 2000, "A Self-calibration Method for Robotic Measurement System," ASME ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 122, No. 1, pp 174-181 (16)

　　29A. Khan, D. Ceglarek, J. Shi, J. Ni, and T. C. Woo, 1999, "Sensor Optimization for Fault Diagnosis in Single Fixture Systems: A Methodology," ASME Transactions, Journal of Manufacturing Science and Engineering, Vol.121, No.1, pp. 109-117 (17)

　　30J. Yuan and J. Ni, 1998, "The Real-Time Error Compensation Technique for CNC Machining Systems." Journal of Mechatronics, Vol. 8, No. 3. pp. 359-380. (42)

　　31J. C. Liang, H. F. Li, J. X. Yuan, and J. Ni, 1997, "A Comprehensive Error Compensation System for Correcting Geometric, Thermal, and Cutting Force-Induced Errors," The International Journal of Advanced Manufacturing Technology, Vol. 13, pp. 708-712 (2)

　　32E. Lu, J. Ni, and S.M. Wu, 1996, "An Integrated Lattice Filter Adaptive Control System for Time-Varying CMM Structural Vibration Control, Part I: Theory and Simulation", ASME Transaction, Journal of Engineering for Industry, Vol. 118, No.1, p 67-76, and also presented at 1992 ASME WAM (1)

　　33P.S. Huang, and J. Ni, 1995, "On-line error compensation of coordinate measuring machines", International Journal of Machine Tools and Manufacture, Vol. 35, No. 5 , pp. 725-738.

　　34Y.D. Chen, X.J. Tang, J. Ni, and S.M. Wu, 1994, "Automatic Digitization of Free-Form Curve by Coordinate Measuring Machines", International Journal of Production Research, Vol. 32, No. 11, pp.2603-2612, also in Proceedings of ASME WAM, Anaheim, CA 1992 (5)

　　35J. Ni and S.M.Wu, 1993, "An On-Line Measurement Technique for Machine Volumetric Error Compensation", ASME Transaction, Journal of Engineering for Industry, Feb., Vol. 115, No.1, pp.85-92 (6)

　　36J.S. Chen, J.X. Yuan, J. Ni and S.M. Wu, 1992, "Compensation of Non-rigid Body Kinematic Effect on a Machining Center", Transaction of NAMRI, Vol. 20, pp.325-329

　　37H. Zhang, J. Ni and S.M. Wu, 1990, "Simulation Study of An Improved Scheme for Forecasting Compensatory Control", Transaction of NAMRI , Vol. 18, pp.329-333

　　38F. Shen, J. Ni and S.M. Wu, 1989, "Design and Implementation of a Modular Multi-Processor System for Machine Monitoring and Diagnostics", Transaction of NAMRI , Vol. 17, pp.319-324

• 成果奖励

　　2001，北美制造研究年会最佳论文奖

　　2002，国际设计与制造前沿会议最佳论文奖

　　2004，国际设计与制造前沿会议最佳论文奖

　　2005，半导体研究协会最佳论文奖

　　2007，半导体研究协会最佳论文奖

荣誉表彰

　　1991，制造工程师学会杰出青年制造工程师奖

　　1994，被克林顿总统授予美国国家科学基金总统教授奖

　　1999，中国国家自然科学基金会海外杰出青年基金获得者

　　2000-2001，美国密西根大学杰出教职成就Robert M. Caddell奖

　　2002 美国密西根大学工学院杰出研究奖

　　2002，制造工程师学会Fellow

　　2003，上海市政府海外科学家杰出贡献银质奖章

　　2004，美国机械工程学会Fellow

　　2006-2011，美国密西根大学工程学院吴贤铭冠名教授

　　2006-2007， 美国密西根大学工学院杰出教育成就奖

　　2013年度中华人民共和国国际科学技术合作奖获得者。

社会任职

　　2003-2004, 美国机械工程学会，制造工程分会，主席

　　2000.9 – 200来自5.8 美国机械工程学会，制造工程分会执行委员会委员

　　1997.7 – 2000.6，美国机械工程学会制造技术组技术规划委员会委员

　　1994 – 2003，《制造系统》杂志副主编

　　1995 – 1999，2003 – ，机械工业部，中国机械科学研究院客座研究员

　　1994 – 1997，华中科技大学客座教授

根深项矛美装德全后准陆　　1995 -1998，200校小政松害背科曲4 –，台湾工业技术研究院机械工业研究实验室顾问罗功工应渐谓呼先益容委员会委员

　　1998 – 2001，2003 – 2006 ，清华大学客座教授

　360百科　1999 – 2002，大连理工大学客座教授

　　2000 造还小我路官清施九列误– 2003，西安交通大学客座教授

　　2001 – 2002，香港理工大学特聘讲座教授

　　2002 – 2005，中国科学院海外评审委员会委员

　　2003-2006，中国科技部海外专家组委员

　　2004-，韩国机械与材料研究院，微细工厂计划，科学顾问

　　2007-，南非科技与技术部，先进生产技术计划，科学顾问

　　2008-，日本东京农工大学 客座教授