
鄂加强,男,湖南湘潭县人,1972年生,热能工程专业博士,控制科学与工程博士后,机械工程博士后,教授/博士生导师(2011年)来自,国家精品课程主讲教师。
- 中文名称 鄂加强
- 外文名称 E Jiaqiang
- 国籍 中国
- 民族 汉族
- 出生地 湖南湘潭县
人物介绍
鄂加强,男,湖南湘潭县人,1972年生,热能工程专业博士,控制科学与工程博士后,机械工程博士后,教授/博士生导师,国家精品课程主讲教师,湖南省优秀硕士论文指导教师。2007年荣获湖来自南省科技进步二等奖1项,2010年荣获湖南省教学成果二等奖1项,2011年荣获湖南省科技进步三等奖1项,2013年荣获湖南省科技进步三等奖1项,2015年荣获中国机械工业科技进步三等奖1项。先后为本科生开设热工测试技术、流体力学、工程热力360百科学、换热器原理与设计和能源与动力专业导论等课程,为研究生开设高等工程热力学、高等燃烧学、热工过程智能控制以及热动力妈斗损车使名宜挥就住设备智能故障诊断等课程;已指导4名博士研究生、2名博士后、70名硕士研究生,正征处报跳也在指导3名博士后、6名博士研医收乱供究生和15名硕士研究生。
目前为国家自然科学基金委员会工程科学一处、二处、三处通讯评审专家,高等学校机电类学科委员会能源与动力工程学科教学委员会委员,中国内燃机学会理事,高校工程热物理学会理事,国际SCI期刊"Journal of Low Frequency Noise, Vibration and Active Control"的副主编,国际SCI期刊"Advances in Mechanical Engineering"和"Journal of Combustion"的民脸孙差宜续业客座主编,控制工程期刊编委,教育部科技奖励评审专家,湖南丰句便省自然科学基金委员会评审专家,在除态甚面系况图北京市自然科学基金委员会评审苦什专家,河北省自然科学基金委员会评审专家,广西区自然科学基金委员会评审专家,浙江省自然科学基金委员会评审专家以及湖南省内燃机学会理事,《Renewable and Sustainable Energy Reviews》、《Applied Energy》、《Energy》、《Energy C品很onversion and Management》、《Applied Thermal Engineerin甲劳千子g》、《Fuel》、《I元女谁松须nternational J职美看律能报察子术ournal of Hydrogen Energy》、《Int运叶演史ernational Journal of Heat and Mass Transfe弦升广对草注却厚r》、《Applied Soft Computi记照逐阳决东路ng》、《Energy & Fuels》、《Powder Technology》或其他国际SCI期刊《International 章片庆服话理Journal of Thermal Sciences》、《Aerospace Science and Technology》、《Experim若度行争且缩松ental Thermal and Fluid Science》、《Canadian Journal of Chemical En真钱gineering》、《Particuology》、《Korean Journal of Chemical Engineering》和《Environmental Progress & Sustainable Energy》等国内外30多个知名期刊审稿专家。
学习经历
秋争专单活假2013.08-2014.08 新加坡国立大学机械工程系从事学术交流与访问研究
2012.09-2013.01 中山大学外国语学院国家公派出国留学人员英语高级班培训
2007.11-2010.07 湖南大学机械工程博士后流动站从事流体机械现代优化设计研究
2004.10-2006.12 湖南大学控制科学与工程博士后流动站从事智能检测、控制及智能信息融合处理研究
1999.08-2004.09 中南大学热能工程专业(硕博连读)从事热工设备及过程检测、控制与优化研究
1993.09-1997.07 吉林大学(原吉林工业大学)汽车工程学院热能专业学习
工作践清这号汉青区类装经历
2004.09- 湖南大学机械与运载工程学院从事热动力设备及工程的智能检测、故障诊断以及排放控制等教学及科研工作;
1997.07-1999.08 湘潭电机集切科名京离数团公司技术中心从事大型矿用自卸车(108t与154t)设计工作
研究广植风方向
能源与动力设备检测、仿真与优化;复杂能源动力设备高效传热与节能技术;太阳能、风能和生物质能利来自用工程及关键技术;复杂能源动力设备排放污染控制新技术;新能源动力电池系统热流协同优化;能源动力系统工程、能源安全及能源经济
负责项目
[1] 国家自然科学基金项目:Pd/石墨烯催化型旋转式微粒捕集器过滤体分区微波加热再生与热-电-化-力学耦合协同优化研究,主持树面直销常供维味,在研;
[2] 武器装备预研重点基绝好局配黄型坚升金项目:甚高分辨率××减/隔振总体设计方法,主持,已结题;
[3] 国家自然360百科科学基金项目:微粒捕集器过滤体复合再生与多场协同机理及其优化研究,主持,已结题;
[4] 湖南省自然科学基金项目:含噪声铜火法冶炼热动力学系统混沌与分形识别,主持,已结题;
[5] 湖南省教研教改项目:基于价值链驱动的能源与动力工程专业课程体系流程再造、重构与实践,主持,在研;
[6] 湖南省教研教改项目:大工程观下热物理基础课程教学内容和叫更型增课程体系改革与实践,主持,已结题;
[7] 建设机械关键技术国家重点实验室开态齐导油杨安因才胞利放基金项目:负压吸拾作用下环卫洗扫车气流卷吸颗粒床层的多相流动机理研究,主持,已结题;
[8] 国家留学基金项目:微尺度多孔介质稳定燃烧机理及其应用研究,主持,已结题;
[9] 中央高校基关矿待笔乡哪各概本科研业务费专项九编个减汉木鸡了武资金重点基础理论项目:工业低品位热源无机热超导高效回收基础研究,主持,已结题;
[10] 湖南大企岩笑迫色银学青年教师成长计划资助项目:电抓旧主国族磁场作用下微尺度多孔介质稳定燃烧机理研究,主持,已结题;
[11] 湖南省工程车辆底盘制造补承办扬显工程技术研究中心开放基金项目:工程车辆混合卫愿逐意编沉讨重错致杀动力锂电池组热流协同设计优化研究,主持,在研;
[12] 湖南省工程车辆底盘制造工程技术研究中心开放基金项慢几见名亚当们目:环卫洗扫车负压吸拾机理辨析,主持,在研;
[13] 湖南省工程车辆底盘制造工程技术研究中心开放基金项感东间目:工程车辆混合动力锂电池组热流协同设计优化研究,主持,在研;
[14] 长沙市科技局重点项目:车用混合动力罪战承笔样区富弱哪养曾锂电池组热流设计与控制关键技术项目,主持,在研;
[15] 长沙市科技局重点项目:基于多传感器信息融合的中小吨位起重机臂筒智能液压校正装置研制,主持,已结题;
[16] [可再生能源电力技术湖南省重点实验室开放基金项目:兆瓦级风电机组风力桨叶多学科设计优化理论,主持,已结题;
[17] 校企合作项目:碟式太阳能聚光器动力学特性分析,主持,已结题;
[18] 校企合作项目:兆瓦级风力机高强度螺栓联接可靠性技术研究,主持,已结题;
[19] 校企合作项目:涡轮增压器水冷轴承体冷却水流量辨识模型,主持,已结题;
[20] 高校委批察角托项目:新体制导引头的能根客农抗无源干扰技术研究,主持,已结题;
[21] 广州市花都区科技计划项目:机电信息整合的柔性数字化经编机研发,主持,已结题;
[22] 校企合作项目:大功率磁悬浮阀门远程控制关键技术研究,主持,已结题;
[23] 校企合作项目:1.5MW风电偏航减速机技术研究,主持,已结题;
[24] 国家"十一五"科技支撑计划重点项目:村镇低品位能源综合利用关键技术研究,参与,已结题;
[25] 国家自然科学基金项目:柴油机微粒捕集器多孔介质过滤体失效辨析及抗失效机理研究,参与(第2),已结题;
[26] 国家自然科学基金面上项目:汽油机沸石分子筛碳氢捕集器冷起动碳氢捕集机理及其热-流-力学耦合协同优化研究[51776062],参与(第2),在研;
[27] 湖南省自然科学基金重点项目:车用微粒捕集器复合再生过程气粒两相流动及燃烧数值模拟[06JJ20018],参与(第2),已结题;
[28] 湖南省科技计划重点项目:车用三效催化转化器高效长寿低污染关键技术与应用,参与(第2),已结题;
[29] 湖南省自然科学基金项目:微粒捕集器微波及铈-锰基添加剂复合再生过程的全耦合仿真,参与(第2),已结题;
[30] 湖南省自然科学基金:LED大功率路灯多场协同散热机理研究,参与(第2),已结题.
[31] 湖南省教研教改项目:热能与动力工程专业以发动机排放污染及控制为特色的创新课程体系的构建与实践,参与(第2),已结题;
出版专著
[1]鄂加强. 铜精炼过程优化建模与智能控制[M]. 长沙:湖南大学出版社,2006.
[2]鄂加强. 智能故障诊断及其应用[M]. 长沙:湖南大学出版社,2006.
[3]鄂加强,李志鹏,张长宗,滕达著. 新型双向硬密封大口径旋球阀现代设计方法与技术[M]. 北京:中国水利水电出版社,2011.
[4]鄂加强,左红艳,罗周全. 神经网络模糊推理智能信息融合及其工程应用[M]. 北京:中国水利水电出版社,2012.
[5]袁文华,鄂加强,龚金科. 柴油机高压共轨喷油系统设计优化及智能控制[M]. 北京:中国水利水电出版社,2014.
[6]鄂加强,杨蹈宇,崔洪江,唐文武. 工程热力学[M]. 北京:中国水利水电出版社,2010.
[7]龚金科,鄂加强,谭理刚,邓元望. 热动力设备排放污染及控制(国家"十一五规划教材")[M]. 北京:中国电力出版社,2007.
[8]伏军,龚金科,鄂加强. 柴油机微粒捕集器喷油助燃再生过程热工模型及其控制[M]. 北京:中国水利水电出版社,2017.
专利
[1] 鄂加强,左威,彭庆国,王曙辉,朱浩,刘腾,邓元望,龚金科. 一种用于道路清扫车的可变流通面积吸嘴[P]. ZL201510104259.5, 2016.
[2] 蔡皓,霍鹏光,鄂加强,邓元望. 一种新型类椭圆齿廓转子机油泵及其转子和转子设计方法[P]. ZL201510783644.7, 2015.
[3] 龚金科,王曙辉,鄂加强,余明果,伏军,吴钢,吁璇. 柴油机微粒捕集器主动热再生方法及其装置[P]. ZL200810031099.6, 2009.
[4] 龚金科,王曙辉,鄂加强,吴钢,杨汉乾,郭华. 一种消减柴油机微粒物质排放的方法及其装置[P]. ZL200710035168.6, 2008.
[5] 龚金科,蔡皓,蔡隆玉,鄂加强,谭理刚,邓元望. 汽车尾气三效催化转化器[P]. ZL200710034581.0, 2009.
[6] 蔡皓,龚金科,余明果,鄂加强,邓元望,耿玉鹤. 一种汽车尾气三效催化转化器系统及控制方法[P]. ZL201110071155.0,2011.
[7] 王曙辉, 龚金科, 余明果, 鄂加强, 蔡皓, 左青松. 一种用于太阳能热发电系统的体积换热吸热器[P]. ZL201110259807,2012.
[8] 邓元望, 韩卫, 龚金科, 鄂加强, 朱浩, 王兵杰, 刘腾. 一种具有碳氢捕集功能的柴油机氧化催化转化器[P]. ZL 102322320, 2012.
[9] 邓元望, 刘腾, 鄂加强, 韩卫, 朱浩, 曾谊晖. 一种用于汽油机冷启动工况的HC排放净化系统[P]. ZL102322319, 2012.
[10] 邓元望, 韩卫, 龚金科, 鄂加强, 朱浩, 陈可亮, 刘腾. 一种具有碳氢捕集功能的汽油机尾气处理装置[P]. ZL102278182, 2012.
发表论文
发表论文近300篇,其中发表SCI收录论文70多篇(第1作者或通讯作者发表ESI热点论文2篇、ESI高被引论文13篇),发表EI收录论文180多篇,发表ISTP收录论文20多篇,论文代表作如下:
2018年部分
[1]Jiaqiang E, MinhHieu Pham*, Yuanwang Deng*, Tuannghia Nguyen*, VinhNguyen Duy*, DucHieu Le, Wei Zuo, Qingguo Peng, Zhiqing Zhang. Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends[J]. Energy, 2018, 149: 979-989. SCI 1区 IF: 4.968.
[2]Qingguo Peng, Jiaqiang E*, Jingwei Chen*, Wei Zuo, Xiaohuan Zhao, Zhiqing Zhang. Investigations on effects of wall thickness and porous media on the thermal performance of a non-premixed hydrogen fueled cylindrical micro combustor[J]. Energy Conversion and Management, 2018, 155: 276-286. SCI 1区 IF: 6.377. ESI Highly Cited Papers
[3]Zhiqing Zhang, Jiaqiang E*, Yuanwang Deng*, Wei Zuo, Qingguo Peng, MinhHieu Pham, Zibin Yin. Effects of fatty acid methyl esters proportion on combustion and emission characteristics of a biodiesel fueled marine diesel engine[J]. Energy Conversion and Management, 2018, 159: 244-253. SCI 1区 IF: 6.377.
[4]Wei Zuo, Jiaqiang E*, Rongming Lin. Numerical investigations on an improved counterflow double-channel micro combustor fueled with hydrogen for enhancing thermal performance[J]. Energy Conversion and Management, 2018, 159: 163-174. SCI 1区 IF: 6.377.
[5]Wei Zuo, Jiaqiang E*, Rongming Lin, Yu Jin, Dandan Han. Numerical investigations on different configurations of a four-channel meso-scale planar combustor fueled by hydrogen/air mixture[J]. Energy Conversion and Management, 2018, 160: 1-13. SCI 1区 IF: 6.377.
[6]Teng Liu, Jiaqiang E*, W. M. Yang, Yuanwang Deng*, H. An, Zhiqing Zhang, Minhhieu Pham. Investigation on the applicability for adjusting reaction rates of the optimized biodiesel skeletal mechanism[J]. Energy, 2018, 150: 1031-1038. SCI 1区 IF: 4.968.
[7]Wenyu Hu, Jiaqiang E*, Yuanwang Deng*, Lijun Li, Dandan Han, Xiaohuan Zhao, Zhiqing Zhang, Qingguo Peng. Investigation on performance enhancement of a convective wind energy collecting device in the expressway[J]. Energy Conversion and Management, 2018, 171: 249-271. SCI 1区 IF: 6.377.
[8]Jiaqiang E, Zhiqing Zhang*, Jingwei Chen*, MinhHieu Pham, Xiaohuan Zhao, Qingguo Peng, Wei Zuo, Zibin Yin. Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle[J]. Energy Conversion and Management, 2018, 169: 194-205. SCI 1区 IF: 6.377.
[9]Qingguo Peng, Jiaqiang E*, W. M. Yang*, Hongpeng Xu, Jingwei Chen, Tian Meng, Runzhi Qiu. Effects analysis on combustion and thermal performance enhancement of a nozzle-inlet micro tube fueled by the premixed hydrogen/air[J]. Energy, 2018, 160: 349-360. SCI 1区 IF: 4.968.
[10]Yuanwang Deng, Huawei Liu, Xiaohuan Zhao*, Jiaqiang E*, Jianmei Chen. Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model[J]. Applied Energy, 2018, 210: 279-287. SCI 1区 IF: 7.900. ESI Highly Cited Papers
[11]Qingguo Peng, Jiaqiang E*, Zhiqing Zhang, Wenyu Hu, Xiaohuan Zhao. Investigation on the effects of front-cavity on flame location and thermal performance of a cylindrical micro combustor[J]. Applied Thermal Engineering, 2018, 130: 541-551. SCI 2区 IF: 3.771.
[12]Jiaqiang E, Yu Jin, Yuanwang Deng, Wei Zuo*, Xiaohuan Zhao, Dandan Han, Qingguo Peng, Zhiqing Zhang. Wetting models and working mechanisms of typical surfaces existed in nature and its application on super-hydrophobic surfaces: A review[J]. Advanced Materials Interfaces, 2018, 5, 1701052. Doi: 10.1002/admi.201701052. SCI 2区 IF: 4.834. Y
[13]Jiaqiang E*, Zhiqing Zhang*, Zhengfang Tu, Wei Zuo, Wenyu Hu, Dandan Han, Yu Jin. Effect analysis on flow and boiling heat transfer performance of cooling water-jacket of bearing in the gasoline engine turbocharger[J]. Applied Thermal Engineering, 2018, 130: 754-766. SCI 2区 IF: 3.771. ESI hot paper, ESI Highly Cited Papers
[14]Jiaqiang E, Dandan Han, An Qiu, Hao Zhu*, Yuanwang Deng*, Jingwei Chen, Xiaohuan Zhao, Wei Zuo, Hongcai Wang, Jianmei Chen, Qingguo Peng. Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system[J]. Applied Thermal Engineering, 2018, 132: 508-520. SCI 2区 IF: 3.771.
[15]Jiaqiang E, Dandan Han, Yuanwang Deng*, Wei Zuo, Cheng Qian, Gang Wu, Qingguo Peng, Zhiqing Zhang. Performance enhancement of a baffle-cut heat exchanger of exhaust gas recirculation[J]. Applied Thermal Engineering, 2018, 134: 86-94. doi: 10.1016/j.applthermaleng.2018.01.109. SCI 2区 IF: 3.771.
[16]Yuanwang Deng, Changling Feng, Jiaqiang E*, Hao Zhu*, Jingwei Chen, Ming Wen, Huichun Yin. Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review[J]. Applied Thermal Engineering, 2018, 142: 10-29. SCI 2区 IF: 3.771.
[17]Jiaqiang E, Haojie Liu, Xiaohuan Zhao*, Dandan Han*, Qingguo Peng, Wei Zuo, Tian Meng, Runzhi Qiu. Investigation on the combustion performance enhancement of the premixed methane/air in a two-step micro combustor[J]. Applied Thermal Engineering, 2018, 141: 114-125. SCI 2区 IF: 3.771.
[18]Jiaqiang E, Meng Yue, Jingwei Chen*, Hao Zhu*, Yuanwang Deng, Yun Zhu, Feng Zhang, Ming Wen, Bin Zhang, Siyi Kang. Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffle[J]. Applied Thermal Engineering, 2018, 144: 231-241. SCI 2区 IF: 3.771.
[19]Guanlin Liu, Jiaqiang E*, Teng Liu, Wei Zuo, Qingling Zhang. Effects of different poses and wind speeds on the flow field of the dish solar concentrator based on virtual wind tunnel experiment with constant wind[J]. Journal of Central south University, 2018, 35(8): 1948-1957. SCI 4区 IF: 0.761.
2017年部分
[1]Jiaqiang E*, Minhhieu Pham*, D. Zhao*, Yuanwang Deng, DucHieu Le, Wei Zuo, Hao Zhu, Teng Liu, Qingguo Peng, Zhiqing Zhang. Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review[J]. Renewable and Sustainable Energy Reviews, 2017, 80: 620-647. SCI 1区 IF: 9.184. ESI Hot Papers, ESI Highly Cited Papers
[2]Wei Zuo, Jiaqiang E*, Dandan Han, Yu Jin. Numerical investigations on thermal performance of double-layer four-channel micro combustors for micro-thermophotovoltaic system[J]. Energy Conversion and Management, 2017, 150: 343-355. SCI 1区 IF: 6.377.
[3]Wei Zuo, Jiaqiang E*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on a comparison between counterflow and coflow double-channel micro combustors for micro-thermophotovoltaic system[J]. Energy, 2017, 122: 408-419. SCI 1区 IF: 4.968. ESI Highly Cited Papers
[4]Wei Zuo, Jiaqiang E*, Wenyu Hu, Yu Jin, Dandan Han. Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor[J]. Energy, 2017, 126, 1-12. SCI 1区 IF: 4.968. ESI Highly Cited Papers
[5]Jiaqiang E*, Qingguo Peng*, Yuanwang Deng, Wei Zuo, Haili Liu. Numerical investigation on the combustion characteristics of non-premixed hydrogen-air in a novel micro-combustor[J]. Applied Thermal Engineering, 2017, 110: 665-677. SCI 2区 IF: 3.771. ESI Highly Cited Papers
[6]Wei Zuo, Jiaqiang E*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on thermal performance of a micro-cylindrical combustor with gradually reduced wall thickness[J]. Applied Thermal Engineering, 2017, 113: 1011-1020. SCI 2区 IF: 3.771. ESI Highly Cited Papers
[7]Bin Zhang, Jiaqiang E*, Jinke Gong*, Wenhua Yuan, Xiaohuan Zhao, Wenyu Hu. Influence of structural and operating factors on performance degradation of the diesel particulate filter based on composite regeneration[J]. Applied Thermal Engineering, 2017, 121: 838-852. SCI 2区 IF: 3.771.
[8]Yuanwang Deng, Wenping Zheng, Jiaqiang E*, Bin Zhang, Xiaohuan Zhao, Qingsong Zuo, Zhiqing Zhang, Dandan Han. Influence of geometric characteristics of a diesel particulate filter on its behavior in equilibrium state[J]. Applied Thermal Engineering, 2017, 123: 61-73. SCI 2区 IF: 3.771.
[9]Yuanwang Deng, Jinhui Cui, Jiaqiang E*, Bin Zhang, Xiaohuan Zhao, Zhiqing Zhang, Dandan Han. Investigations on the temperature distribution of the diesel particulate filter in the thermal regeneration process and its field synergy analysis[J]. Applied Thermal Engineering, 2017, 123: 92-102. SCI 2区 IF: 3.771.
[10]Jiaqiang E*, Cheng Qian, Hao Zhu, Qingguo Peng, Wei Zuo, Guanlin Liu. Parameter-identification investigations on the hysteretic Preisach model improved by the fuzzy least square support vector machine based on adaptive variable chaos immune algorithm[J]. Journal of Low Frequency Noise, Vibration and Active Control, 2017, 36(3): 227–242. SCI 4区 IF: 1.017.
[11]Gang Wu, Shen Li, He Zhao, Xinglin Yang, Jiaqiang E. Experimental and frequency-domain study of acoustic damping of single-layer perforated plates[J]. Aerospace Science and Technology, 2017, 69: 432-438. SCI 2区 IF: 2.228.
2016年及其以前发表论文
[1]Jiaqiang E1,*, Xiaohuan Zhao1,*, Haili Liu, Jianmei Chen, Wei Zuo, Qingguo Peng. Field synergy analysis for enhancing heat transfer capability of a novel narrow-tube closed oscillating heat pipe[J]. Applied Energy, 2016, 175: 218-228. SCI 1区 IF: 7.182.
[2]Jiaqiang E, Wei Zuo*, Xueling Liu, Qingguo Peng, Yuanwang Deng, Hao Zhu*. Effects of inlet pressure on wall temperature and exergy efficiency of the micro-cylindrical combustor with a step[J]. Applied Energy, 2016, 175: 337-345. SCI 1区 IF: 7.182. ESI Highly Cited Paper
[3]Teng Liu1, Jiaqiang E1,*, W. M. Yang1,*, Hui An, Hao Cai. Development of a skeletal mechanism for biodiesel blend surrogates with varying fatty acid methyl esters proportion[J]. Applied Energy, 2016, 162: 278–288. SCI 1区 IF: 7.182. ESI Highly Cited Paper
[4]Jiaqiang E1, Teng Liu1, W. M. Yang*, Yuanwang Deng, Jinke Gong. A skeletal mechanism modeling on soot emission characteristics for biodiesel surrogates with varying fatty acid methyl esters proportion[J]. Applied Energy, 2016, 181: 322-331. SCI 1区 IF: 7.182.
[5]Bin Zhang, Jiaqiang E*, Jinke Gong*, Wenhua Yuan, Wei Zuo, Yu Li, Jun Fu. Multidisciplinary design optimization of the diesel particulate filter in the composite regeneration process[J]. Applied Energy, 2016, 181: 14-28. SCI 1区 IF: 7.182.
[6]Wei Zuo, Jiaqiang E*, Haili Liu*, Qingguo Peng, Xiaohuan Zhao, Zhiqing Zhang. Numerical investigations on an improved micro-cylindrical combustor with rectangular rib for enhancing heat transfer[J]. Applied Energy, 2016, 184: 77-87. SCI 1区 IF: 7.182.
[7]Jiaqiang E1, Teng Liu1, W. M. Yang*, Jing Li, Jinke Gong, Yuanwang Deng. Effects of fatty acid methyl esters proportion on combustion and emission characteristics of a biodiesel fueled diesel engine[J]. Energy Conversion and Management, 2016, 117: 410-419. SCI 1区 IF: 5.589. ESI Highly Cited Paper
[8]Jiaqiang E, Qingguo Peng*, Xueling Liu*, Wei Zuo, Xiaohuan Zhao, Haili Liu. Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor[J]. Energy Conversion and Management, 2016, 124: 427-438. SCI 1区 IF: 5.589.
[9]Jiaqiang E, Xiaohuan Zhao*, Yuanwang Deng, Hao Zhu. Pressure distribution and flow characteristics of closed oscillating heat pipe during starting process at different vacuum degrees[J]. Applied Thermal Engineering, 2016, 93: 166-173. SCI 2区 IF: 3.444.
[10]Jiaqiang E*, Wei Zuo, Haojie Liu, Qingguo Peng. Field synergy analysis of the micro-cylindrical combustor with a step[J]. Applied Thermal Engineering, 2016, 93: 83-89. SCI 2区 IF: 3.444. ESI Highly Cited Paper
[11]Jiaqiang E*, Wei Zuo, Junxu Gao, Qingguo Peng, Zhiqing Zhang, Pham Minh Hieu. Effect analysis on pressure drop of the continuous regeneration-diesel particulate filter based on NO2 assisted regeneration[J]. Applied Thermal Engineering, 2016, 100: 356-366. SCI 2区 IF: 3.444.
[12]Wei Zuo, Jiaqiang E*, Xueling Liu, Qingguo Peng, Yuanwang Deng*, Hao Zhu. Orthogonal Experimental Design and Fuzzy Grey Relational Analysis for emitter efficiency of the micro-cylindrical combustor with a step[J]. Applied Thermal Engineering, 2016, 103: 945-951. SCI 2区 IF: 3.444. ESI Highly Cited Paper
[13]Haili Liu, Jiaqiang E*, Yuanwang Deng*, Changqing Xie, Hao Zhu. Experimental study on pyrolysis characteristics of the tobacco stem based on the microwave heating method[J]. Applied Thermal Engineering, 2016, 106: 473-479. SCI 2区 IF: 3.444.
[14]Haili Liu, Jiaqiang E*, Xiaoqian Ma, Changqing Xie. Influence of microwave drying on the combustion characteristics of food waste[J]. Drying Technology, 2016, 34(12): 1397-1405. SCI 2区 IF: 1.976.
[15]Jiaqiang E*, Ming Liu, Yuanwang Deng, Hao Zhu, Jinke Gong. Influence analysis of monolith structure on regeneration temperature in the process of microwave regeneration in the diesel particulate filter[J]. Canadian Journal of Chemical Engineering, 2016, 94(1): 168-174. SCI 4区 IF: 1.066.
[16]Jiaqiang E, Longfu Xie, Qingsong Zuo, Guiju Zhang. Effect analysis on regeneration speed of continuous regeneration-diesel particulate filter based on NO2-assisted regeneration[J]. Atmospheric Pollution Research, 2016, 7(1): 9-17. SCI 4区 IF: 1.637.
[17]Jiaqiang E, Cheng Qian, Teng Liu, Guanlin Liu. Chaos Analysis on the Acceleration Control Signals of the Piezoelectric Actuators in the Stewart Platform[J]. Shock and Vibration, 2016, 2016: 1-9. SCI 4区 IF: 1.281.
[18]Qingsong Zuo, Da-ming Zhang, Jiaqiang E*, Jinke Gong. Comprehensive analysis on influencing factors of composite regeneration performance of a diesel particulate filter[J]. Environmental Progress & Sustainable Energy, 2016, 35(3): 882-890. SCI 4区 IF: 1.672.
[19]Bin Zhang, Jinke Gong, Jiaqiang E, Yu Li. Failure recognition of the diesel particulate filter based on catastrophe theory[J]. Canadian Journal of Chemical Engineering, 2016, 94(3): 596-602. SCI 4区. IF: 1.231.
[20]Jiaqiang E*, Haijiao Huang, Xiaohuan Zhao. Numerical investigation on effects of bluff body in flat plate micro thermo photovoltaic combustor with sudden expansion[J]. Journal of Central South University, 2016, 23(4): 975-982. SCI 4区 IF: 0.562.
[21]Jiaqiang E, Qingsong Zuo*, Haili Liu, Yu Li, Jinke Gong. Endpoint forecasting on composite regeneration by coupling cerium-based additive and microwave for diesel particulate filter[J]. Journal of Central South University, 2016, 23(8): 2118−2128. SCI 4区 IF: 0.562.
[22]Tao Chen, Zhixin Wu, Jinke Gong, Jiaqiang E. Numerical Simulation of Diesel Particulate Filter Regeneration Considering Ash Deposit[J]. Flow, Turbulence and Combustion, 2016, 97(3): 849–864. SCI 3区. IF: 1.863.
[23]Jiaqiang E, Cheng Qian, Haili Liu, Guanlin Liu. Design of the H∞ robust control for the piezoelectric actuator based on chaos optimization algorithm[J]. Aerospace Science and Technology, 2015, 47: 238-246. SCI 2区 IF: 2.057.
[24]Jiaqiang E, Qingsong Zuo, Yuanwang Deng, Hao Cai, Jinke Gong. Intelligent forecasting on composite regeneration endpoint of DPF in the Vehicle[C]. 2015 International Conference on Intelligent Transportation, Big Data & Smart City, Halong Bay, Vietnamese, 2015. (Organizing committee chairman)
[25]Jiaqiang E, Cheng Qian, Teng Liu, Guanlin Liu. Research on the Vibration Characteristics of the New Type of Passive Super Static Vibratory Platform Based on the Multiobjective Parameter Optimization[J]. Advances in Mechanical Engineering, 2014, 6: 1-8. SCI 4区 IF: 0.640.
[26]Qingsong Zuo, Jiaqiang E*, Jinke Gong, D. M. Zhang, Tao Chen, Guohai Jia. Performance evaluation on field synergy and composite regeneration by coupling cerium-based additive and microwave for a diesel particulate filter[J]. Journal of Central South University, 2014, 21(12): 4599−4606. SCI收录 IF: 0.520.
[27]Guohai Jia, Jinke Gong, Jiaqiang E, Hao Cai, Shuhui Wang. Effect of Interference Fit on Fretting Wear of Gear Shaft Shoulder[J]. Journal of Central South University, 2014, 21(10): 3746-3752. SCI收录IF: 0.520.
[28]Hao Cai, Yafei Liu, Jinke Gong, Jiaqiang E. Sulfur Poisoning Mechanism of Three Way Catalytic Converter and its Grey Relational Analysis[J]. Journal of Central South University, 2014, 21(11): 4091- 4096. SCI收录 IF: 0.520.
[29]Jiaqiang E, Rongjia Zhu, Jianmei Chen, Yan-ping Long, Xiaofeng Hu. Oscillation heat transfer dynamic model for the new type oscillation looped heat pipe with double liquid slugs[J]. Journal of Central South University, 2012, 19(11): 3194-3201. SCI收录.
[30]Haidong Yang, Jiaqiang E, Ting Qu. Multidisciplinary design optimization for air-condition production system based on multi-agent technique[J]. Journal of Central South University of Technology, 2012, 19(2): 527-536. SCI收录
[31]Zhigang Zhang, Jiaqiang E, Guixiang Zhang. A novel dense spectrum correction algorithm for extracting vibration signals in internal combustion engine and its application[J]. Journal of Central South University of Technology, 2012, 19(10): 2810-2815. SCI收录
[32]Hejun WANG, Jiaqiang E, Feiqi DENG. A novel adaptive mutative scale optimization algorithm based on chaos genetic method and its optimization efficiency evaluation[J]. Journal of Central South University of Technology, 2012, 19(9): 2554-2560. SCI收录
[33]Chunhua Wang, Zhaoping Zhong, Jiaqiang E. Flow regime recognition in spouted bed based on recurrence plot method[J]. Powder Technology, 2012, 219: 20-28. SCI2区,IF: 2.759.
[34]Jiaqiang E, Yuqiang Li, Jinke Gong. Function chain neural network prediction on heat transfer performance of oscillating heat pipe based on grey relational analysis[J]. Journal of Central South University of Technology, 2011, 18(5): 1733-1737. SCI收录
[35]Chunhua Wang, Zhaoping Zhong, Rui Li, Jiaqiang E. Intelligent fitting of minimum spout-fluidised velocity in spout-fluidised bed[J]. Canadian Journal of Chemical Engineering, 2011, 89(1): 101-107. SCI收录
[36]Chunhua Wang, Zhaoping Zhong, Rui Li, Jiaqiang E. Recognition of the flow regimes in the spouted bed based on fuzzy c-means clustering[J]. Powder Technology, 2011, 205(1-3): 201-207. SCI2区,IF: 2.759.
[37]Yihui Zeng, Shaojun Liu, Jiaqiang E. Neuron PI control for semi-active suspension system of tracked vehicle and its application[J]. Journal of Central South University of Technology, 2011, 18(2): 444-450. SCI收录
[38]Aihua Jiang, Chi Mei, Jiaqiang E, Zhangming Shi. Nonlinear combined forecasting model based on fuzzy adaptive variable weight and its application[J]. Journal of Central South University of Technology, 2010,17(4): 863-867. SCI收录
[39]Chunhua Wang, Zhaoping Zhong, Rui Li, Jiaqiang E. Prediction of jet penetration depth based on least square support vector machine[J]. Powder Technology, 2010, 203(2): 404-411. SCI2区,IF: 2.759.
[40]J. Q. E, Y. N. Wang, C. Mei, J. K. Gong. Chaotic behavior of crude copper composition time series in the process of matte converting and its predicable time scale[J]. Nonlinear Analysis: Real World Applications, 2006, 7(4): 651-661. SCI 1区 IF: 2.519.
[41]Quan Zhang, Ming Zhang, Jiaqiang E. Research on optimum operation and structure of tundish[J]. Journal of Iron and Steel Research International. 2002, (1): 25-27 SCI收录
[42]Zhangming Shi, Jiaqiang E, Chunyang Liu. Numerical simulation of flow phenomena and optimum operation of tundish[J]. Journal of Central South University of Technology. 2003, 10(2): 155-158. SCI收录
评论留言